ALL VACANCIES

Field Service Engineer - Rotary Screw Compressors - Air Systems

You must be familiar with air compressors
Electrical Knowledge and Qualifications.

You working in the Midlands of England.

You must be fit and be able to lift weights and work in confined spaces.
You must have a UK driving Licence.
You must be able to work on his / her own initiative.
You must be presentable and have good communication skills.

This is an independent company, specialising in the supply, installation, servicing and maintenance of industrial compressed air/gas filtration and drying equipment.

 
Key Responsibilities: 
· Scheduled mechanical and electrical service of Rotary Screw compressors and air/gas equipment
· Call out duties for occasional breakdown work
· Installation and commissioning of new equipment
· Identifying and reporting further sales/service opportunities
 
 
· Mechanical and electrical engineering experience
· Full clean UK driving licence
· Experience of face to face interaction with customer and site personnel
· Experience of building relationships with customers
 
Package:

Salary: 36-40k
Overtime, Vehicle
(No call rota)
Full industry/manufacturer product training provided

Refrigeration / Field Service Engineer - ULT Cascade Refrigeration South East - 40K basic + Vehicle

Full training will be given, the company are looking for a motivated Refrigeration Engineer, looking to increase their knowledge. You
will have good refrigeration knowledge and some electrical controls skills. Ideally you will be FGAS and level 2 or 3 qualified in Refrigeration

Role;

Service Engineer ULT Cascade Refrigeration systems and Climatic Chambers.
This is a Field based Service Engineer role.
You will be servicing / maintaining environmental and laboratory test chambers. ( operating temperature ranging from -80°C to +350°C ).

You will be servicing also Ultra Low temperature Fridges ,and Freezers, ( cascade systems). (Operating temperature ranging from -70°C to -40°C .)

Ideally you will be based close to A12/M25 near North London, Broxbourne, Waltham Abbey, Enfield or Hoddesdon.

You must be willing to work away from home in the week .
You must have good communication skills.

There is very little (no) on call and weekend working.

40K basic + Company Van , door to door,

Refrigeration / Field Service Engineer - ULT Cascade Refrigeration South East - 40K basic + Vehicle

Full training will be given, the company are looking for a motivated Refrigeration Engineer, looking to increase their knowledge. You
will have good refrigeration knowledge and some electrical controls skills. Ideally you will be FGAS and level 2 or 3 qualified in Refrigeration

Role;

Service Engineer ULT Cascade Refrigeration systems and Climatic Chambers.
This is a Field based Service Engineer role.
You will be servicing / maintaining environmental and laboratory test chambers. ( operating temperature ranging from -80°C to +350°C ).

You will be servicing also Ultra Low temperature Fridges ,and Freezers, ( cascade systems). (Operating temperature ranging from -70°C to -40°C .)

The role is home based.

This role is to primarily cover Telford, West Midlands and surrounding areas.

You must be willing to work away from home in the week and Occasionally overseas.
You must have good communication skills.

There is very little (no) on call and weekend working.

40K basic + Company Van , overtime, bonus scheme, door to door, daily subsistence

Field Service Engineer - Woodworking Machines.

You must be willing to work away in the week.
You must have good mechanical skills.( This role is mechanically biased gear, blade, chains,bearings,shafts).
You will be trained on the Service of CNC machines and Machine tools. ( full training will be given)
You will have done a formal apprenticeship. (Ideally a NVQ or City and Guilds or HNC / HND Qualification].
Experience of any electrical fault finding would be a bonus.


You will be covering Central England, Coventry, Birmingham down to the M4.
You will be working on Woodworking equipment such as; CNCs, Edgebander, sanders, planers, bandsaws and routers.

The role

1. To provide in-house and on-site support to customers for the repair and maintenance ,
2. To complete installations.
3. To carry out on-site customer training and assist with in-house training when required.
4. To repair or replace sub assembly modules.
5. To carry out on-site and in-house upgrades.
6. Be prepared to travel within the UK and stay away in the week.

You will be employed by an international Machine tool manufacturer.

UK driving license.

The Package:

Basic 34-39K + Vehicle, overtime, Company Bonus Scheme, Vehicle, Phone, Laptop, Credit Card, Health Insurance , Dental care cover

Junior Field Service Engineers 3 X 4

This is an opportunity for an apprentice trained Engineer that is looking to become a Field Service Engineer.

You will ideally have a background in Machining and using machine tools such as Mill, Lathes and Grinders. Experience of Servicing or Maintaining these machines would be useful.

The company manufacture complex CNC machine tools. (5 axis)

The role is mechanically biased.

They are looking for possibly 3 or 4 Ideal locations include; Carlisle, Manchester (Northwest), Birmingham ( Midlands) and Northampton
 
Brief overview.
 
Trainee Servicing and commissioning engineer
33K to 38K depending on experience
Salary – Paid for 50 hours a week no overtime – may work 40 hours or 55 hours (inc driving)
Multiple nights away a week
Premier inn card
Van
Fuel card - Personal mileage paid for
25 days Holiday – 8 days bank holiday

Field Service Engineer- x 3 ( painting, finishing units and spray booths)

Theses are the area that Engineers will ideally located (25 miles) Guildford area, A1 Lincolnshire and North East

You will need:( Gas and electrical skills).

These roles could suit anyone from a wide background such as; Mortuaries, AHU, HVAC, Burners,

Gas experience preferable. The company will consider domestic Gas safe qualifications. ideally qualified with direct or indirect gas burner experience.

Electrical skills

Experience on 3 phase / Single phase Electrical essential - (PLC’s / Motor Controls / Inverters etc a distinct advantage)
 
You must be flexible to travel. The duties will be to carry out routine servicing, including filter changing and break down repairs on a wide range of painting and finishing units.

The ideal candidate requires a good level of fitness and ability to work at heights. Occasional
call out cover will also be required for a local key customers and Weekend work (pre-booked only)


BENEFITS PACKAGE

Salary: 38K – 40 K , DOE - O.T.E 50K - 6OK + Company Vehicle
Mobile Phone
Pension
Private Health Scheme
23 Days plus stat Holidays

Machinist / Tool Maker

Ideally you will have experience of working in a precision engineering precision with machining and hand fitting skills.

Ideally you will have experience of tools such as Lathes, mills, drills, press tools drills, and surface grinders.

Key skills; surface grinding, honing, to close tolerances.

The role will be to help assemble build and test high precision machines.

Fit, assemble, and test new tool units and all associated parts and assemblies.
Ensure that the final product is correctly fitted and assembled in accordance with the internal procedure.
Refurbish existing tool units including modifications to an as new condition.
Carry out testing of the tool units in accordance with agreed procedures.
Assist with the building or repair of complete press assemblies when required.
Work as part of the highly skilled mechanical assembly team.
Work in accordance with Company procedures and specific guidelines and terms of reference at all times.

Desirable
Forklift driving license is desirable but not essential for this role.

Remuneration
Good basic salary
Overtime 1.5
37 hour working week
25 days holiday + bank holidays
Company life,Pension

Mechanical Fitter

You must be work to workshop standards including Health and Safety.
Ideally you will have good mechanical, Electrical and Pneumatic skills
You will be required to build and test complex packaging machines.

This will include; electro-mechanical assembly, bolted structural assembly, Rotational bearings, Drive mechanisms, Drive shafts, linkages, motors, Pneumatics.

Ideally you will have an Engineering Apprenticeship plus several years relevant practical experience.
Qualifications in City and Guilds, NVQ or HNC would be advantageous.

Skills;

You must have a minimum 3 years industry experience.
You could have worked in Machine Assembly, Fitter or a Service Engineer.
You will have good communication skills
The ability to work on your own initiative

37 hours per week + Overtime.
Site based.

Mechanic / Fitter / Field Service Engineer - Compressor - Pumps - Rotating machines - Engines - Turbines

This is Filed based role.( You must be willing to travel and work away).

A Gas Compressor Manufacture is looking to hire a Field Service Engineer to cover the UK and Ireland.
You will be fully trained on their Gas compressors. You will join an established Field Service Team.
This would be an excellent opportunity for an engineer who wants to be trained on new machines.

You will be working on the latest 500 bar high pressure compressors.

You will be required to work as a National Service Engineer which realistically means working away
from home 4 nights a week. ( No weekend work)

You must be a British National who is able to get security clearance as us will be required to work on some defence sites.

You must be fit and be able to lift weights and work in confined spaces.

You must have good mechanical skills.( This role is mechanically biased gear, blade, chains,bearings,shafts).
You will have done a formal apprenticeship. (Ideally a NVQ or City and Guilds or HNC / HND
Qualification].
The ability to read or understand electrical diagrams would be an advantage.

You must have a UK driving Licence.
You must be able to work on his / her own initiative.
You must be presentable and have good communication skills.

Basic Salary 30-35K
£30 for each night worked away from home.
Pension 5% / 3%
40 Hour week
Van
25 Days holiday

Field Service Engineer - Experience of PLCs and controls

You will be working on PLC controlled Industrial equipment used in high-end manufacturing. The role requires
both Mechanical and Electrical skills. Processes include Surface treatment, Precision cleaning and Ultrasonic Cleaning.

These processes often PLC controlled via 24 V Control Panel , ( PLC HMI skills advantageous)

Ideally you will be located in the South East, near the M3, M4 or M40 motorways.

Skills and Background;

ideally you will have worked on PLC controlled machines such as; Machine tools, Packaging or any industrial automation.

You must have experience as a Service Engineer, ( 3 years minimum ).
You must have the ability to read Electrical diagrams and fault find.

Mechanical fault finding and repair. Filters, Hoses, motors and seals. (pneumatics an advantage.)
Preferable is an Electrical Qualification , City and Guilds, 18th Edition or HNC / HND / or ONC.
An understanding of Single and three phase electrical systems.

You must be willing to work away in the week ( On average 5-10 days a month) and occasionally overseas.
You must be willing to travel extensively in the UK.

You must be physically fit and willing to work in industrial environments.

Basic 42-46K
Bonus 5K
Car
Pension, mobile phone, laptop, iPad.